You have no items in your shopping cart.
Yamaha Pump & Handling Parts
Let us know if you have any questions or concerns. We proudly price match advertised prices!
-
Worx Yamaha FX 140, FX HO Sponsons
Specifically designed for the unique handling characteristics of the Yamaha FX 140 AND FX HOProduct benefits: - Greater stability - Easy fitment - Improved cornering - Superior handling
Learn More...$329.95 -
WR04036 YAMAHA ENGINE COOLING ADAPTER/ANODE
Billet anodised fitting to replace anode block which allows for extra cooling water to be added or removed from the rear of Yamaha 1.8 Engine block to suit your cooling needs. A must for any modified recreational or race craft.
Learn More... -
WORX Yamaha GP1800, 15+ VXR Pump Seal Kit To Suit WR246
Recommend for the WR246 Intake Grate this pump seal kit will easily fit into the voids of the grate to not only reduce cavitation but maximize pump efficiency and performance.
Learn More... -
WR224 Yamaha FX 140, FX HO Intake Grate
The Worx WR224 Intake Grate fixes the cavitation by loading the pump more efficiently giving even better hook up and drive and will not cost you top speed in flat calm conditions. The grate has two bars at the front and a single bar at the rear supporting a foil that picks up water in even the roughest conditions to fully load the pump for better drive and handling.
Learn More...$197.00 -
RIVA Yamaha 1.8 Valve retainer upgrade kit RY19040-SRU
Titanium Valve Retainer Upgrade Kit increases the reliability of your engine by reducing the possibility of valve float at high rpm. Includes 16 lightweight, precision-machined titanium valve retainers. A must for any modified watercraft.
Learn More...$349.99 -
WORX Intake Grate Yamaha Superjet / Blaster
This is a similar grate to the WR201 however it is less aggressive and gives 1-2 MPH higher top speed but does not have the same braking effect as the WR201. If you want top speed and usually ride in calmer/smoother water this is the one for you. Perfectly matched to enable easy installation. Fits all years 1990-2017 Yamaha Superjet and WaveBlaster 1, 2.
Learn More...$225.00 -
WR06008 YAMAHA PUMP CONE
Tapered offset to match OEM reduction nozzle Creates even pressure in reduction nozzle too reduce pump cavitation Increased acceleration, drive and top speed Suits all ‘3 bolt’ 1.8 Yamaha pump models
Learn More...$144.00 -
Solas 12/18 Yamaha
This all new impeller delivers unmatched acceleration & top speed in Yamaha applications.
Learn More...$257.99 -
WR04031-K YAMAHA 1.8 DUAL COOLING PLATE KIT
Yamaha Dual fitting pump cooling plate kit .Billet anodised plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. Also includes 2 x Billet Thru hull fitting for custom cooling kits. Kit Includes: 1 x Dual pump plate and 2 x ½ Inch thru hull fittings For Custom ‘design yourself’ Cooling kits A must for High horsepower applications.
Learn More... -
RIVA YAMAHA 2015+ FX PRO-SERIES STEERING SYSTEM
Introducing the ultimate race proven steering system for the Yamaha FX! Design features billet aluminum construction for maximum strength & rigidity. Directly replaces bulky OEM mechanism with a stronger & lighter unit. Delivers a precision feel and the confidence to push your craft to the limit with improved dependability and comfort. Accepts standard 7/8" MX bars and provides adjustable quick-steer feature. Key Features: Billet alum...
Learn More...$629.99 -
WORX Yamaha Wave Blaster 1 & 2 Ride Plate
Longer than the stock unit, with sharper edges this ride plate will get you on the plane quicker and let you turn harder without letting go. Great in rough water and in the surf.
Learn More...$222.00 -
RIVA Pro Bar 0-Degree Bars
RIVA PRO-BAR 0- Degree Standup Bars are constructed from a proprietary aluminum alloy that offers maximum strength with reduced vibration. High tech finish and premium features make this the ultimate watercraft bar! Key Features: Made from 7/8”, proprietary, T6 aluminum alloy for superior tensile strength & vibration dampening Cross bar clamps CNC machined from 6061 aluminum and mounted with stainless hardware & threadlock C...
Learn More... -
WORX Yamaha Superjet Ride Plate Freestyle
- Reduced length allows more control over ski in freestyle maneouvers while helping to keep hooked up during turns where the ski is leaned way over - Designed by Freestylers for Freestyle - Widely regarded as the best freestyle plate available for the Superjet - “D” cut-out with the to keep the boat more stable in those difficult freestyle tricks - Softer lines to help it slide out when you need it to - Preferred choice for lig...
Learn More...$299.00 -
WORX Ride Plate Yamaha Superjet 2008-2020 Freeride
Specifically designed for the 2008+ Yamaha Super Jet. Since Yamaha reconfigured and re-positioned the 2008 to current year Yamaha superjet pump location, this required a new ride plate design from WORX to get the maximum improvement over the OEM Design ride plate as well as any standard aftermarket design plates available. After working exclusively with Ross Champion, WORX has introduced the new Freeride/Freestyle aluminum ride plate with D-cut r...
Learn More...$299.00 -
RIVA Yamaha 2021 SuperJet Performance Ride Plate
Our Performance Ride Plate for the 2021 Yamaha SuperJet delivers the perfect balance of top speed and improved handling in a variety of water conditions. Race bred design includes deep center skeg and channels for excellent traction in turns with improved straight line stability. Features extended length and trim angle for quicker planing and improved acceleration. Easy bolt-on installation. Key Features: Superior handling performance. Imp...
Learn More...$268.95 -
Worx Yamaha FX 2019+ Sponson Kit Insert Edition Sponsons
Bored of the way your ski currently handles? Want to corner tighter and faster? Make your jet ski feel like it's turning on rails with Worx Racing Component's WR563-I Sponsons.Made for Yamaha 2019+ FX models, these sponsons have been specifically designed to improve the handling performance of your Yamaha ski. Featuring our greatest adjustability innovation yet with 8 possible settings; you're able to tailor your watercraft's ...
Learn More...$410.00 -
WORX Maxiloader Intake grate for 03+ 800 SX-R
Deeply scooped grate for better hook up. Perfectly matched to enable easy installation. The Worx Intake Grate is a must for any one wanting to get the best from their new SX-R. In testing we discovered that with the OEM grate, the boat lost hook up in anything but flat calm water. Many State and World titles have been won by riders using this intake grate. The WR222 gives the boat the pump loading it needs by holding the boat on the water and k...
Learn More...$182.00 -
WORX Yamaha Intake Grate Superjet 2008+ (Aggressive)
Specifically designed for the all new 2008+ Yamaha Superjet hull. The pump was reconfigured and re-positioned on the 2008+ superjet requiring a new design intake grate to get the maximum performance.
Learn More...$197.00 -
Solas Yamaha Concord 144mm 12/20 Impeller
The new Solas Concord YJ-CD-12/20 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. YJ-CD-12/20 is designed for stock Yamaha EX applications with TR-1 engine.
Learn More...$280.95 -
WR240 Yamaha VXR, VXS Intake Grate (2009-2014)
Suits Yamaha VXR/VXS modesl from 2009- 2014 Product Benefits include: * Significantly reduced cavitation * Increased acceleration * Increased top end speed We have also developed a pump seal kit to compliment this grate. Location specific, these polyurethane inserts fill the voids in the OEM pump inlet shoe that bleed air into the pump causing cavitation.
Learn More...$260.00