Free Shipping* on orders over $139 with code SHIPIT
Hydro-Turf ships in about 1-2 weeks.
WE BEAT ANY PRICE! Check us out on YouTube!

Pump & Handling

Let us know if you have any questions or concerns. We proudly price match advertised prices!

Items 1 to 20 of 61 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • RIVA Yamaha 'GEN-2' GP1800 SVHO Top-Loader Intake Grate

    Our revolutionary new intake grate for GP1800, VXR and VXS delivers the ultimate in speed, hook up & strength. All new design features oversized top loader wing and optimized inlet ramp for closed course and offshore racing. Bulletproof stainless steel construction makes this grate virtually indestructible and eliminates the need for additional restrictive support bars. Race bred design significantly reduces cavitation and provides superior h...
    Learn More...
    $359.00

  • RIVA Yamaha GP 1800 / VXR / VXS Billet Driveshaft Sleeve Kits

    Direct heavy-duty replacement for original thin rubber hose. Anodized to prevent corrosion. High quality AH&E silicone couplers. Overlapping clamp design features smooth inner surface to prevent coupler damage. Recommended for all performance applications. Our precision machined Billet Driveshaft Sleeve is a direct replacement for the thin factory rubber hose that is prone to distortion and failure. Sleeve is constructed of 6...
    Learn More...
    $54.95

  • RIVA Yamaha GP1800 Pump Seal Kit "Gen-2"

    Dramatically reduce cavitation and prop spin with our easy to install Pump Seal Kits. Location specific, molded inserts fill the voids in pump inlet shoe that bleed air into pump causing cavitation. Recommended for modified craft using RIVA Gen-2 Top-Loader Intake Grate (part# RY22110-1). Includes detailed installation instructions.
    Learn More...
    $84.95

  • WORX Yamaha GP1800 Sponsons WR552-I

    Dramatically improve your handing with WORX GP1800 Sponsons. These sponsons feature 4 points of adjustment to allow you to customize the handling according to riding conditions. Includes all necessary hardware. Also fits the 2011+ VXR Hulls!
    Learn More...
    $380.00

  • WORX Yamaha GP1800 Intake Grate WR246

    If you're looking to get the most out of your Yamaha GP1800, the WORX Intake Grate is a must have. From rec riders to racers, this intake grate provides noticeable performance enhancements. Designed for the ultimate hook-up and handling, this intake grate combats cavitation in choppy to rough water conditions, maximises acceleration and even adds top end speed. Stability and cornering ability are also improved, this is a huge benefit when tow...
    Learn More...
    $255.00

  • Solas Yamaha YS-CD-11/15 Concord Impeller

    The new Solas Concord YS-CD-11/15 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. This 155mm diameter, YS-CD-11/15 impeller is designed for modified Yamaha applications with 1.8L HO engines. The YS-CD-11/15 Solas Concord Impeller is also used in our Yamaha FX HO Stage 1 Performance Kit.
    Learn More...
    $309.99

  • RIVA Yamaha GP1800/VXR/VXS 2015-2020 Pro-Series Steering System

    Introducing the ultimate race proven steering system for the Yamaha GP1800! Fully adjustable design features billet aluminum construction for maximum strength & rigidity. Directly replaces bulky OEM mechanism with a stronger & lighter unit. Delivers a precision feel and the confidence to push your craft to the limit with improved dependability and comfort. Accepts standard 7/8" MX bars and provides adjustable quick-steer feature. K...
    Learn More...
    $599.99

  • YFS-HS-155 SOLAS STAINLESS LINER

    Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams ag...
    Learn More...
    $269.99

  • RIVA Yamaha GP1800/VXR/VXS, FX 2019+ Pro-Series Sponsons

    Our race proven Pro-Series Sponsons deliver dramatically improved handling & straight line stability with superior fin & backing plate design. Features a cutting edge stepped surface for unmatched control. Bulletproof mounting system utilizes aluminum inserts for maximum strength. Fully adjustable three position fin to control the amount of influence they have on the craft. Easy bolt-on installation uses original mounting points. Includ...
    Learn More...
    $589.95

  • RIVA YAMAHA EX PERFORMANCE RIDE PLATE RY21100

    RIVA Yamaha EX Ride Plate delivers the perfect balance of increased top speed and improved handling in a variety of water conditions. Features deep channels for improved acceleration and traction in turns. Provides excellent straight-line stability at top speed with reduced porposing.  Key Features: Superior handling performance Improved acceleration Reduced porposing Improved straight line tracking at top speed Easy bolt-on installation. ...
    Learn More...
    $239.95

  • SOLAS YS-CD-13/22 155mm

    These Solas Yamaha Waverunner impeller will give you better performance (1-2 MPH Gain) over your stock impeller. You will also see reduced cavitation, better holeshot with increased acceleration. The Solas Yamaha impellers pro design are made of stainless steel. Fits 2008+ FZR Sho and FZS and 2008+ FX SSHO and FX SHO Cruiser 
    Learn More...

    Regular Price: $370.00

    Special Price $260.00

  • WR04051 Yamaha Supercharger (2008-2017) rebuild kit

    Includes all bearing and plates that are not available to buy seperatly OEM SVHO back plate allow use of SVHO wheels in SHO chargers if front housing is modified. New thrust plate, bearing and rings to suit OEM and aftermarket shafts Service kit for worn or failed chargers NOTE: WORX has throughly tested this product in a range of worn and failed chargers. We encourage through inspection of failed charger housings. Damage or excessi...
    Learn More...
    $249.00

  • WR04043 Yamaha 4 inch Air Filter Kit (non-supercharged)

    *Suits all 1.8 Naturally aspirated engines  Allows for maximum Air Flow to your engine * Increased acceleration and overall RPM's * Race proven design a must for any Modified/ Race watercraft * Engine Breather Filter also provided in kit
    Learn More...
    $165.00

  • RIVA Stainless Steel Wear Ring for Yamaha 155mm/66V-51312-01-94

    Our heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams again...
    Learn More...
    $354.95

  • WR04041 Yamaha Superjet Exhaust sleeve

    WORX Yamaha superjet exhaust sleeve fits directly into the OEM exhaust muffler and reduces the stinger size of the pipe to create more back pressure in the pipe for increased top speed. Used by all Pro National and World Lites class Champions
    Learn More...
    $69.99

  • RIVA Yamaha 1.8 Valve retainer upgrade kit RY19040-SRU

    Titanium Valve Retainer Upgrade Kit increases the reliability of your engine by reducing the possibility of valve float at high rpm. Includes 16 lightweight, precision-machined titanium valve retainers. A must for any modified watercraft.
    Learn More...
    $349.99

  • WR06008 YAMAHA PUMP CONE

    Tapered offset to match OEM reduction nozzle Creates even pressure in reduction nozzle too reduce pump cavitation Increased acceleration, drive and top speed Suits all ‘3 bolt’ 1.8 Yamaha pump models
    Learn More...
    $144.00

  • WR0703 Yamaha 2012+ FX, FX SHO, 2014+ FX SVHO Pump Seal Kit

    Yamaha Pump Plug Kit WR0703, Improves pump intake dynamics by changing the shape and flow of the standard pump intake system. This kit goes perfectly with the Worx Scoop Grate WR237 (also for the Yamaha 2012,2013,2014 FX, FX SHO.) The Kit is easy to fit and provides immediate improvement on stock.
    Learn More...
    $98.00

  • WR224 Yamaha FX 140, FX HO Intake Grate

    The Worx WR224 Intake Grate fixes the cavitation by loading the pump more efficiently giving even better hook up and drive and will not cost you top speed in flat calm conditions. The grate has two bars at the front and a single bar at the rear supporting a foil that picks up water in even the roughest conditions to fully load the pump for better drive and handling.
    Learn More...
    $197.00

  • WORX Yamaha FX HO, FX SHO, FX SVHO (2012-2018) Intake Grate

    Specifically designed for the 2012 Yamaha FX SHO hull. Benefits include: - Closed Course and Offshore Race tested and proven Used by Chris MacClugage in 2016 P1 Aqua X skis built by the factory Yamaha Deans team!!! - Superior hook up - Better bow lift for top speed  - Smoother turning - Utilize WORX Pump Plug kit WR0703
    Learn More...
    $252.00

Items 1 to 20 of 61 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
LiveZilla Live Chat Software

Please wait...

You've added this item to your shopping cart:

{{var product.name}}

Part #: {{var product.sku}}





Item successful removed.
 Continue shopping

    Pay Securely Now