Yamaha Pump & Handling

Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams ag...
Learn More...

Worx Racing cast aluminium pump shoe is a direct replacement for the stock plastic pump shoe that easily distorts and breaks under high speeds in race applications or under huge load from freestyle engines. Pre drilled and tapped for easy installation this is a must have upgrade for your modified stand up to allow use of larged winged aftermarket intake grates that provide maximum efficiency to your jet pump without sacrificing reliability. Suits...
Learn More...

This is one of the first intake grates ever produced by Worx. It is used by many of the top racers and recreational riders world wide and is the most popular Superjet/Blaster Intake grate on the market. These boats cavitate easily and lose drive because of the relatively flat intake area, the WR201 will solve these issues and will take the handling capability of your boat to new levels. It is a great rough water and surf riding intake grate beca...
Learn More...

Fits: 00-03 XLT 1200, 02-03 XL800 - Greater stability - Easy fitment - Improved cornering - Superior handling
Learn More...

This is a similar grate to the WR201 however it is less aggressive and gives 1-2 MPH higher top speed but does not have the same braking effect as the WR201. If you want top speed and usually ride in calmer/smoother water this is the one for you. Perfectly matched to enable easy installation. Fits all years 1990-2017 Yamaha Superjet and WaveBlaster 1, 2.
Learn More...

- Designed for 1991-07 Superjet - "D" cut-out design allowing you to push the boat hard into turns and provides greater stability and less tendance to slide out - Extra length to hold the boat flatter - Bevelled leading edge on the “D” cut-out that picks up water when the bow of the boat starts to lift under hard acceleration or in rough water, this helps to hold the boat flatter and give you a lot better drive and control &...
Learn More...

Deeply scooped grate for betSpecifically designed for all 2007 and older Yamaha Super Jet models. After working exclusively with Ross Champion, WORX has introduced the new Freeride/Freestyle aluminum ride plate with D-cut rear plane surface. This design allows the wave rider and freestyler to break the rear end loose with ease for tail whips and aerial moves. This plate is NOT recommended for racing or high speed applications where top speed stab...
Learn More...

WORX Intake Grate for 2003+ Kawasaki SXR 800. This intake grate is a must for any one wanting to get the best from their SX-R. With the OEM grate the boat looses hook-up in anything but flat calm water. If you want the ultimate in hook-up and handling without sacrificing major speed loss then this is the intake grate for you.
Learn More...

Product benefits: - Greater stability - Easy fitment - Improved cornering - Superior handling
Learn More...

Longer than the stock unit, with sharper edges this ride plate will get you on the plane quicker and let you turn harder without letting go. Great in rough water and in the surf.
Learn More...

- Reduced length allows more control over ski in freestyle maneouvers while helping to keep hooked up during turns where the ski is leaned way over - Designed by Freestylers for Freestyle - Widely regarded as the best freestyle plate available for the Superjet - “D” cut-out with the to keep the boat more stable in those difficult freestyle tricks - Softer lines to help it slide out when you need it to - Preferred choice for lig...
Learn More...

Specifically designed for the 2008+ Yamaha Super Jet. Since Yamaha reconfigured and re-positioned the 2008 to current year Yamaha superjet pump location, this required a new ride plate design from WORX to get the maximum improvement over the OEM Design ride plate as well as any standard aftermarket design plates available. After working exclusively with Ross Champion, WORX has introduced the new Freeride/Freestyle aluminum ride plate with D-cut r...
Learn More...

Deeply scooped grate for better hook up. Perfectly matched to enable easy installation. The Worx Intake Grate is a must for any one wanting to get the best from their new SX-R. In testing we discovered that with the OEM grate, the boat lost hook up in anything but flat calm water. Many State and World titles have been won by riders using this intake grate. The WR222 gives the boat the pump loading it needs by holding the boat on the water and k...
Learn More...

Specifically designed for the all new 2008+ Yamaha Superjet hull. The pump was reconfigured and re-positioned on the 2008+ superjet requiring a new design intake grate to get the maximum performance.
Learn More...

- Greater stability - Easy fitment - Improved cornering - Superior handling
Learn More...

Benefits Include: - Specifically designed for the 2008 Superjet hull - Better drive and control - Greater stability
Learn More...

- Fully adjustable to suit your riding style and ability - Bolts straight into factory mounting holes (pre 95 models must drill 5 holes) - Greater stability - Improved cornering - Superior handling
Learn More...

Fits ALL Superjets $150.00 - Adjustable to suit your individual riding style and ability - Constructed from Marine Grade Aluminium - Suitable for ALL styles of riding ! - Also compatabile with various aftermarket hulls
Learn More...