Pump, Handling & Steering
-
P3 Labs Extended VTS Ramp Kit (Version 2) for the Sea-Doo Spark (14-16)
Version 2 Now Shipping! For use with 2014-2016 Sparks equipped with VTS (variable trim system). This Extended Range VTS Ramp Kit V2 was developed due to the lack of options on the market. This kit is designed to increase the angle of your VTS, allowing you to do wheelies with ease! This Version 2 kit gives you the same operating range as the Trixx! Installation is easy, and requires slight trimming of the venturi or swap out to a 2017+ ventu...
Learn More...Regular Price: $249.00
Special Price $199.00
-
Sea-Doo Spark OEM Replacement Plastic Wear Ring
Fits Sea-Doo 2 up and 3 up models.
Learn More...Regular Price: $61.99
Special Price $58.99
-
Sea-Doo Spark Impeller, Stainless Steel Wear Ring + Removal Tool Bundle
The new Solas Concord SK-CD-12/17 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. This 12/17 variable pitch impeller was designed for both stock and mildly modified craft. Fits the Sea-Doo Spark with both the 60hp and 90hp engines. For the Spark impeller removal tool This setup is recommended for stock skis. 60hp and 90hp. For tuned skis check out the bundl...
Learn More...$369.95 -
Sea-Doo Spark Impeller, OEM Wear Ring + Removal Tool Bundle
The new Solas Concord SK-CD-12/17 blows away the performance of your stock impeller! Large blade area and superior hub design deliver increased acceleration and top speed. This 12/17 variable pitch impeller was designed for both stock and mildly modified craft. Fits the Sea-Doo Spark with both the 60hp and 90hp engines. For the Spark impeller removal tool Comes with WR001 and oem wear ring.
Learn More...Regular Price: $359.95
Special Price $319.99
-
Sea-Doo SPARK Extended Range Variable Trim System (VTS) for iBR (2014-2023)
Features This Sea-Doo exclusive accessory lets you exaggerate how high you can raise the nose or how deep you can bury it in the water. The extended range VTS doubles the range of adjustment compared to our current standard VTS. Adjustments are instantaneous thanks to the quick activation switch mounted on the handlebar to allow fine tuning of the watercraft trim angle while riding. Simple plug-in connection, a...
Learn More...$229.99 -
WORX Seadoo Spark Intake Grate
This item is out of stock until July 2022. We will send tracking as soon as it is in stock to ship.Our Worx Seadoo Spark Intake grate performs better than stock by far. Better snap off the bottom, better top speed, simply better. Partner it up with the Spark pump plug Kit and you're really moving. This intake grate is a must have for anyone wanting to get the very best from their Seadoo Spark. This intake grate replaces the stock plastic intake ...
Learn More...$240.00 -
RIVA Sea-Doo Spark Stainless Steel Wear Ring
Fits Sea-Doo 2 up and 3 up models.
Learn More...$179.95 -
Riva Spark Top Loader Intake Grate
Our Top-Loader Intake grate for Spark features a unique wing design that eliminates prop spin and cavitation while delivering enhanced acceleration and top-speed. Deep side rails improve stability and handling. Durable black race coating protects from corrosion. IJSBA Race Legal. Key Features: Increased acceleration Reduced cavitation Improved handling Superior straight line stability Applications: All Spark 2-Up & 3-Up models.
Learn More...$249.99 -
Riva Sea-Doo SPARK Sponsons
Our Spark Sponsons will dramatically improve the handling of your craft with their superior blade & backing plate design. Includes a bulletproof mounting system that features a solid backing plate and four anchor points with billet inserts in sponson fins. Sponson depth is adjustable to control the amount of influence they have on the craft. Easy installation uses original mounting studs. Includes necessary hardware and installation instructions.
Learn More...$299.99 -
Sea-Doo XPS 4-TEC Jet Pump Bearing Grease
KEY FEATURES To be used for jet pumps with ball bearing Only One tube will be enough for a 4-tec pump cone NOT FOR USE IN OIL FILLED SEADOO PUMPS SYSTEMS 3.7 fl oz This is factory original equipment, not aftermarket
Learn More... -
SOLAS Sea-Doo Spark 12 Vane Stator
Our 140/75mm Race Pump delivers increased acceleration & top speed along with reduced cavitation. Designed for high performance applications that exceed the limits of original pump efficiency. Features computer designed 140/75mm 12-vein stator section that is far more efficient than stock pump. Constructed of high grade stainless steel for superior strength and corrosion resistance. Utilizes OEM bearings, seals and driveshaft. Mode...
Learn More...Regular Price: $549.95
Special Price $519.95
-
RIVA SPARK PUMP SEAL KIT
Dramatically reduces cavitation and prop spin on Sea-Doo Spark models. Location specific, molded inserts fill the voids in intake grate shoe that can bleed air into pump causing cavitation. Allows for a positive seal for maximum performance. Recommended for modified craft using aftermarket RIVA Intake Grate. Includes detailed installation instructions. Applications: All Spark 2-Up & 3-Up models with RIVA Top Loader Intake Grate
Learn More... -
Sea-Doo SPARK Handlebar with Adjustable Riser
This one of a kind handlebar with adjustable riser gives you more leverage to easily maneuver the Sea-Doo SPARK and customize your experience to your personal riding style. Quickly adjust steering to a variety of heights- using the lover position for cruising/sit-down riding, and extend to maximum height in seconds for stand-up riding. Key Features: Adjustable length of 1.625" to 4" (42.5mm to 103.5mm) Just flip the lever to make the adjus...
Learn More...$309.99 -
Sea-Doo Spark OEM Impeller Housing 2014-2022 267000815
OEM impeller housing for SeaDoo Sparks NOTE: This is only the housing. It doesnt include the internals of the jet pump like shaft, bearings and wear ring. Old part number: 267000815
Learn More...$319.99 -
Filter Kit - Works for all PWCs
This Universal Water Filter/Strainer Kit protects your inter cooler from damage and reduced efficiency due to waterborne debris such as sand, seaweed, grass and pebbles that are sucked into the cooling system. Oversize "Super Strainer" mounts easily inline with cooling system and features clear filter cup for quick visual inspection. Kit includes large high quality marine strainer, stainless steel mounting bracket and a selection of adapter fitti...
Learn More... -
WORX Seadoo Spark Pump Plug Kit
To suit Intake Grate WR244. Fills the unwanted cavities in the pump shoe that cause cavitation to improve acceleration and jet unit performance.
Learn More... -
Sea-Doo Spark Manual Reverse Kit
This kit can be easily added to your Sea-Doo Spark and will aid immensely in docking maneuvers and trailer loading. A lever located on the left side makes it easy to engage reverse and avoid the need for aggressive or dangerous maneuvers.
Learn More...$339.95 -
WORX Seadoo Spark Ride Plate
Transform your Seadoo Spark in all water conditions improving drive, control and stability! A simple must have addition for anyone wanting top performance from this fun machine! Race proven Seadoo Spark extended ride plate Added length creates extra nose pressure on launch allow pump hook up and quicker acceleration Increase handling characteristics throughout cornering Better straight line drive and added stability Redesigned steppe...
Learn More...$240.00 -
Sea-Doo New OEM Spark with iBR PWC Wiring Harness
Sea-Doo Spark Wiring Harness
Learn More... -
RIVA Sea-Doo SPARK Handlebar Extensions 2016+
Riva Handlebar Extensions allow easy installation of aftermarket grips up to 130mm in length. Mounts securely to ends of original handlebars via machined locking feature. Fits 2016 and newer Sea-Doo SPARK models. Key Features: Allows installation of popular ODI 130mm grips. Precision machined from 6063 billet aluminum. Anodized to prevent corrosion. Sold as a pair/Grips sold separately
Learn More...