Pump, Handling & Steering
-
RIVA Sea-Doo 4 tec Handlebar Extender Set
RIVA Handlebar Extensions allow easy installation of popular ODI 130mm grips for added comfort & control. Mounts securely to ends of original handlebars via machined locking feature. Fits all Sea-Doo 4-TEC models except 16+ SPARK & 18+ RXT/GTX. Note: We offer part #RS24130-BES-1 for 2016+ SPARK applications. Key Features: Allows installation of popular ODI 130mm grips. Precision machined from 6063 billet aluminum. Anodized to pre...
Learn More... -
WORX Seadoo GTX, RXT Intake Grate
The OEM grate is fine in flat calm water conditions but is not so good in choppy or rough water, the boat cavitates and looses a lot of drive which causes a drop off in top speed of several MPH. Performance Benefits: - No top speed loss - Better hook up in all water conditions - Better cornering because the Worx grate has two rails running the full length that hang down 12mm below the pump cavity which stop the boat sliding out
Learn More...$182.00 -
WORX Seadoo 2009+ All S3 Hull Models Intake Grate
Benefits include: - Greater control and turning capability - Enhanced hook up - Improved handling in choppy conditions
Learn More...$191.00 -
Sea-Doo Spark OEM Impeller Boot
OEM impeller boot for SeaDoo Sparks
Learn More... -
WR06034 SEADOO BAR EXTENSION
Billet anodized construction Allows fitment of 130mm ODI lock grips Easy install Billet endcap design to prevent grip sliding off if lock clamp fails Included hardware DOES NOT FIT SPARK Models or New ST3 2018 model steering NOTE: Grips NOT Included
Learn More... -
Sea-Doo 300 OEM Impeller Housing 271002018
OEM impeller housing for SeaDoo 300 Models NOTE: This is only the housing. It doesnt include the internals of the jet pump like shaft, bearings and wear ring.
Learn More...$309.99 -
Solas Sea-Doo Impeller SRZ-CD-14/19 + OEM Wear Ring + Removal Tool Bundle
Solas Concord Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation. Fits 159mm pumps on IBR Sea-Doos. REPLACES OEM #: 267000176, 267000285, 267000211, 267000336, 271001386, 267000115, 271001512 Comes with factory OEM Wear ring. Features SRZ series impeller, for IBR skis Includes removal tool ...
Learn More...From: $305.91
To: $390.48
-
WR06020 SEADOO OPAS BLOCKOFF
WR06020 SEADOO OPAS BLOCKOFF
Learn More... -
Worx Sea-Doo Spark Billet Insert Sponsons
WR555-I Seadoo Spark Sponsons Description Designed not just for cutting edge performance but killer style! Same best selling Worx Racing paddle now with billet insert for 4 point adjustment to personalise your watercraft to your own unique riding style! Includes backing rails and all necessary hardware. Product benefits include: Greater cornering ability and more straight line stability Adjustable fin and backing rail to suit r...
Learn More...$400.00 -
Sea-Doo OEM Impeller 2009 RXP-X
OEM impeller for the 09 RXPX
Learn More...$319.99 -
Sea-Doo 2020+ GTR/GTI Riva Pro-Series Sponsons
Our race proven sponsons deliver a significant handling improvement through increased adjustability, strength and design. Adjustable billet aluminum stabilizer wing allows you to tune lean-in handling characteristics. Bulletproof aluminum mounting inserts add strength and increase vertical adjustability. Sponson fins are precision machined from high strength material that will not flex under extreme conditions.
Learn More...$499.95 -
RIVA Sea-Doo SPARK Steering System
Introducing the ultimate race proven steering system for your Sea-Doo SPARK! Steering shaft is constructed of aircraft grade aluminum tubing for maximum strength & rigidity. Directly replaces original plastic system delivering a precision feel and the confidence to push your craft to the limit. Bulletproof bar clamp will accept any 7/8” handlebar. Includes all necessary installation hardware and instructions. High strength aluminum...
Learn More...$599.99 -
Solas Sea-Doo SXX-CD-13/16 Impeller
Solas Concord Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation. All "R" model Solas impellers are placed in a pitch-block before leaving Solas to ensure accuracy for optimal performance. Works well with tuned 230 engines using 161mm pump.
Learn More...Regular Price: $382.95
Special Price $360.00
-
WORX Sea-Doo Right Control Switch Holder
New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System. - Adjustable to suit riding hand postions for ultimate control - OEM switch panel drops straight in (requires NO modifications) - For use with aftermarket handlebars combined with WORX Racing Steering System
Learn More...$185.00 -
Sea-Doo Impeller Boot
Sea-Doo Impeller Boot
Learn More... -
RIVA Sea-Doo RXP (2012-2017) & RXT/GTX (2010-2017) Pro-Series Steering System Bundle
This bundle includes essential items to upgrade the steering system on your RXP-X 260/300. Includes our race proven billet steering system along with precision machined aluminum housings for your IBR triggers and switches. Replaces the original plastic steering system and bulky OEM switches with bullet proof components and cutting edge styling. Compatible with standard MX style bars and grips. RIVA Sea-Doo 2012+ RXP & 2010-17 RXT/GTX Pro...
Learn More...Regular Price: $1,464.90
Special Price $1,399.00
-
Solas Sea-Doo SXX-CD-14/19 Impeller
Solas Concord Impellers increase low-end thrust and top-end speed. Constructed of high strength stainless steel, Solas Impellers feature a polished hub and exclusive hub-end water seal for reduced cavitation. All "R" model Solas impellers are placed in a pitch-block before leaving Solas to ensure accuracy for optimal performance. For highly modified 230 engines with 161mm pump
Learn More...Regular Price: $382.95
Special Price $360.00
-
WORX Sea-Doo Left Control Switch Assy
New from WORX Racing - Billet Anodised iBR/iTC Switch Panel housings to suit aftermarket handlebars when combined with our Steering System. - Adjustable to suit riding hand postions for ultimate control - OEM switch panel drops straight in (requires NO modifications) - Also holds Start/stop switch and button - Will suits Sea-Doo Sparks with optional VTS fitted - For use with aftermarket handlebars combined with WORX Racing S...
Learn More...$185.00 -
Riva RXT/RXT-X S3 Hull Performance Top Loader Intake Grate
Our top-loader intake grate features a unique tapered wing design that eliminates prop spin and cavitation while delivering enhanced acceleration and 2mph additional top-speed. Deep side rails improve stability and handling. Durable black race coating protects from corrosion. Race Legal. Fits all S3 Models Fits: 2017 SEA-DOO RXT-X 300 2017 SEA-DOO RXT 260 (IBR) 2017 SEA-DOO GTX LIMITED 300 2016 SEA-DOO WAKE PRO 215 (IBR) 2016 SEA-DOO RXT-...
Learn More...$249.99 -
WR06025 DESS POST HOLDER
Billet anodised construction Fits 7/8 handle bars Suits All style 4-tec DESS Posts
Learn More...