Free Shipping* on orders over $139 with code SHIPIT
Hydro-Turf ships in about 1-2 weeks.
WE BEAT ANY PRICE! Check us out on YouTube!

Yamaha Intake Grates

Let us know if you have any questions or concerns. We proudly price match advertised prices!

Items 1 to 20 of 58 total

per page

Page:
  1. 1
  2. 2
  3. 3
  • WORX Yamaha Trim Extension SVHO VXR FX GP1800

    This Yamaha Trim extension has been specifically designed to address the trim issue faced with newer Yamaha models. This trim extension provides a quick and easy solution to the lack of trim range found with OEM parts. Designed to increase trim range, this cost effective upgrade will bring the nose of your ski higher, reducing surface drag and providing an added increase to stop speed. Typically an increase of 1-2 MPH can be found in g...
    Learn More...
    $33.00

  • WORX Yamaha GP1800 Intake Grate WR246

    If you're looking to get the most out of your Yamaha GP1800, the WORX Intake Grate is a must have. From rec riders to racers, this intake grate provides noticeable performance enhancements. Designed for the ultimate hook-up and handling, this intake grate combats cavitation in choppy to rough water conditions, maximises acceleration and even adds top end speed. Stability and cornering ability are also improved, this is a huge benefit when tow...
    Learn More...
    $280.00

  • YFS-HS-155 SOLAS STAINLESS LINER

    Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams ag...
    Learn More...
    $269.99

  • WR04051 Yamaha Supercharger (2008-2017) rebuild kit

    Includes all bearing and plates that are not available to buy seperatly OEM SVHO back plate allow use of SVHO wheels in SHO chargers if front housing is modified. New thrust plate, bearing and rings to suit OEM and aftermarket shafts Service kit for worn or failed chargers NOTE: WORX has throughly tested this product in a range of worn and failed chargers. We encourage through inspection of failed charger housings. Damage or excessi...
    Learn More...
    $249.00

  • WORX SEADOO RXP-X, RXT-X INTAKE GRATE

    Specifically designed for the all new SEADOO RXP-X, RXT-X INTAKE GRATE. The pump was reconfigured and re-positioned on the SEADOO RXP-X, RXT-X INTAKE GRATE requiring a new design intake grate to get the maximum performance.
    Learn More...
    $229.00

  • WORX SHO/SVHO 2 deg Trim Wedge VXR FX GP1800

    2 Degree Trim wedge for 1.8 Yamaha SHO/SVHO Jet pumps for increased trim for more top speed
    Learn More...
    $95.00

  • WR04043 Yamaha 4 inch Air Filter Kit (non-supercharged)

    *Suits all 1.8 Naturally aspirated engines  Allows for maximum Air Flow to your engine * Increased acceleration and overall RPM's * Race proven design a must for any Modified/ Race watercraft * Engine Breather Filter also provided in kit
    Learn More...
    $199.00

  • WORX Yamaha Superjet Pump Shoe

    Worx Racing cast aluminium pump shoe is a direct replacement for the stock plastic pump shoe that easily distorts and breaks under high speeds in race applications or under huge load from freestyle engines. Pre drilled and tapped for easy installation this is a must have upgrade for your modified stand up to allow use of larged winged aftermarket intake grates that provide maximum efficiency to your jet pump without sacrificing reliability. Suits...
    Learn More...
    $159.00

  • WORX Maxiloader Superjet & Waveblaster 1 & 2 Intake grate

    This is one of the first intake grates ever produced by Worx. It is used by many of the top racers and recreational riders world wide and is the most popular Superjet/Blaster Intake grate on the market. These boats cavitate easily and lose drive because of the relatively flat intake area, the WR201 will solve these issues and will take the handling capability of your boat to new levels. It is a great rough water and surf riding intake grate beca...
    Learn More...
    $225.00

  • WR0703 Yamaha 2012+ FX, FX SHO, 2014+ FX SVHO Pump Seal Kit

    Yamaha Pump Plug Kit WR0703, Improves pump intake dynamics by changing the shape and flow of the standard pump intake system. This kit goes perfectly with the Worx Scoop Grate WR237 (also for the Yamaha 2012,2013,2014 FX, FX SHO.) The Kit is easy to fit and provides immediate improvement on stock.
    Learn More...
    $98.00

  • WR04041 Yamaha Superjet Exhaust sleeve

    WORX Yamaha superjet exhaust sleeve fits directly into the OEM exhaust muffler and reduces the stinger size of the pipe to create more back pressure in the pipe for increased top speed. Used by all Pro National and World Lites class Champions
    Learn More...
    $69.99

  • WR06008 YAMAHA PUMP CONE

    Tapered offset to match OEM reduction nozzle Creates even pressure in reduction nozzle too reduce pump cavitation Increased acceleration, drive and top speed Suits all ‘3 bolt’ 1.8 Yamaha pump models
    Learn More...
    $144.00

  • WR216 Yamaha XL 1200 LTD, 01 XLT Intake Grate

    This intake grate will increase pump efficiency in all water conditions and with the two parallel bars running the full length of the pump intake you also get better directional stability when you are towing water skiers or other water toys.
    Learn More...
    $197.00

  • WR04036 YAMAHA ENGINE COOLING ADAPTER/ANODE

    Billet anodised fitting to replace anode block which allows for extra cooling water to be added or removed from the rear of Yamaha 1.8 Engine block to suit your cooling needs.  A must for any modified recreational or race craft.
    Learn More...
    $44.00

  • WORX Yamaha GP1800, 15+ VXR Pump Seal Kit To Suit WR246

    Recommend for the WR246 Intake Grate this pump seal kit will easily fit into the voids of the grate to not only reduce cavitation but maximize pump efficiency and performance.
    Learn More...
    $98.00

  • WORX Intake Grate Yamaha Superjet / Blaster

    This is a similar grate to the WR201 however it is less aggressive and gives 1-2 MPH higher top speed but does not have the same braking effect as the WR201. If you want top speed and usually ride in calmer/smoother water this is the one for you. Perfectly matched to enable easy installation. Fits all years 1990-2017 Yamaha Superjet and WaveBlaster 1, 2.
    Learn More...
    $225.00

  • WR224 Yamaha FX 140, FX HO Intake Grate

    The Worx WR224 Intake Grate fixes the cavitation by loading the pump more efficiently giving even better hook up and drive and will not cost you top speed in flat calm conditions. The grate has two bars at the front and a single bar at the rear supporting a foil that picks up water in even the roughest conditions to fully load the pump for better drive and handling.
    Learn More...
    $197.00

  • WORX Yamaha FZR FZS Intake Grate

    Benefits include: - Greater stability control and turning capability - Enhanced hook up - Improved handling in Rough water conditions -Increase in acceleration/ helps reduces cavitation -compatible with WR0701 Pump Plug kit
    Learn More...
    $260.00

  • WORX Maxiloader Intake grate for 03+ 800 SX-R

    Deeply scooped grate for better hook up. Perfectly matched to enable easy installation. The Worx Intake Grate is a must for any one wanting to get the best from their new SX-R. In testing we discovered that with the OEM grate, the boat lost hook up in anything but flat calm water. Many State and World titles have been won by riders using this intake grate. The WR222 gives the boat the pump loading it needs by holding the boat on the water and k...
    Learn More...
    $182.00

  • WR04031-K YAMAHA 1.8 DUAL COOLING PLATE KIT

    Yamaha Dual fitting pump cooling plate kit .Billet anodised plate that fits directly onto OEM Yamaha Jet unit, allowing 2 extra water fittings to be added to your watercrafts cooling system. Also includes 2 x Billet Thru hull fitting for custom cooling kits. Kit Includes: 1 x Dual pump plate and 2 x ½ Inch thru hull fittings For Custom ‘design yourself’ Cooling kits A must for High horsepower applications.
    Learn More...
    $75.00

Items 1 to 20 of 58 total

per page

Page:
  1. 1
  2. 2
  3. 3
LiveZilla Live Chat Software

Please wait...

You've added this item to your shopping cart:

{{var product.name}}

Part #: {{var product.sku}}





Item successful removed.
 Continue shopping

    Pay Securely Now