Free Shipping* on orders over $139 with code SHIPIT
Hydro-Turf ships in about 1-2 weeks.
WE BEAT ANY PRICE! Check us out on YouTube!

Yamaha Intake Grates

Let us know if you have any questions or concerns. We proudly price match advertised prices!

Items 1 to 20 of 70 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • WORX Yamaha Trim Extension SVHO VXR FX GP1800

    This Yamaha Trim extension has been specifically designed to address the trim issue faced with newer Yamaha models. This trim extension provides a quick and easy solution to the lack of trim range found with OEM parts. Designed to increase trim range, this cost effective upgrade will bring the nose of your ski higher, reducing surface drag and providing an added increase to stop speed. Typically an increase of 1-2 MPH can be found in g...
    Learn More...
    $33.00

  • RIVA Yamaha 'GEN-2' GP1800 SVHO Top-Loader Intake Grate

    Our revolutionary new intake grate for GP1800, VXR and VXS delivers the ultimate in speed, hook up & strength. All new design features oversized top loader wing and optimized inlet ramp for closed course and offshore racing. Bulletproof stainless steel construction makes this grate virtually indestructible and eliminates the need for additional restrictive support bars. Race bred design significantly reduces cavitation and provides superior h...
    Learn More...
    $379.00

  • RIVA YAMAHA FX 2019+ PERFORMANCE RIDE PLATE RY21120

    Our new Performance Ride Plate for all 2019 Yamaha FX models delivers the perfect balance of increased top speed and improved handling in a variety of water conditions. Its race bred design features deep channels for improved acceleration and traction in turns. Provides excellent straightline stability at high speed with reduced porpoising. Easy bolt-on installation accepts OEM speed sensor.
    Learn More...
    $322.95

  • WORX Yamaha GP1800 Intake Grate WR246

    If you're looking to get the most out of your Yamaha GP1800, the WORX Intake Grate is a must have. From rec riders to racers, this intake grate provides noticeable performance enhancements. Designed for the ultimate hook-up and handling, this intake grate combats cavitation in choppy to rough water conditions, maximises acceleration and even adds top end speed. Stability and cornering ability are also improved, this is a huge benefit when tow...
    Learn More...
    $280.00

  • RIVA YAMAHA FX 2012+ TOP-LOADER INTAKE GRATE

     Top-Loader intake grate improves hook up and handling in rough conditions. Center wing eliminates prop spin and cavitation found with the stock grate along with the SHO’s tendency to drop on its nose when the throttle is let off at high speeds. Powder coated to prevent corrosion. Fits 2015~14 FX SVHO, 2015~12 FX SHO & 2015~12 FX HO models only. Key Features Include: Dramatic increase in hook-up. Improved top speed in rough co...
    Learn More...
    $264.95

  • YFS-HS-155 SOLAS STAINLESS LINER

    Solas heavy-duty, 100% stainless steel wear rings/impeller liners are the perfect replacement for your damaged original unit. Durable solid stainless steel construction resists debris damage and saltwater corrosion. Original Yamaha wear ring is constructed of cast aluminum with a thin stainless steel liner that is pressed into place. Corrosion quickly develops between the dissimilar metals swelling the thin liner until it closes down and jams ag...
    Learn More...
    $269.99

  • WR04051 Yamaha Supercharger (2008-2017) rebuild kit

    Includes all bearing and plates that are not available to buy seperatly OEM SVHO back plate allow use of SVHO wheels in SHO chargers if front housing is modified. New thrust plate, bearing and rings to suit OEM and aftermarket shafts Service kit for worn or failed chargers NOTE: WORX has throughly tested this product in a range of worn and failed chargers. We encourage through inspection of failed charger housings. Damage or excessi...
    Learn More...
    $249.00

  • WORX SEADOO RXP-X, RXT-X INTAKE GRATE

    Specifically designed for the all new SEADOO RXP-X, RXT-X INTAKE GRATE. The pump was reconfigured and re-positioned on the SEADOO RXP-X, RXT-X INTAKE GRATE requiring a new design intake grate to get the maximum performance.
    Learn More...
    $229.00

  • WORX SHO/SVHO 2 deg Trim Wedge VXR FX GP1800

    2 Degree Trim wedge for 1.8 Yamaha SHO/SVHO Jet pumps for increased trim for more top speed
    Learn More...
    $95.00

  • RIVA YAMAHA EX PERFORMANCE RIDE PLATE RY21100

    RIVA Yamaha EX Ride Plate delivers the perfect balance of increased top speed and improved handling in a variety of water conditions. Features deep channels for improved acceleration and traction in turns. Provides excellent straight-line stability at top speed with reduced porposing.  Key Features: Superior handling performance Improved acceleration Reduced porposing Improved straight line tracking at top speed Easy bolt-on installation. ...
    Learn More...
    $257.95

  • WR04043 Yamaha 4 inch Air Filter Kit (non-supercharged)

    *Suits all 1.8 Naturally aspirated engines  Allows for maximum Air Flow to your engine * Increased acceleration and overall RPM's * Race proven design a must for any Modified/ Race watercraft * Engine Breather Filter also provided in kit
    Learn More...
    $199.00

  • SOLAS YS-CD-13/22 155mm

    These Solas Yamaha Waverunner impeller will give you better performance (1-2 MPH Gain) over your stock impeller. You will also see reduced cavitation, better holeshot with increased acceleration. The Solas Yamaha impellers pro design are made of stainless steel. Fits 2008+ FZR Sho and FZS and 2008+ FX SSHO and FX SHO Cruiser 
    Learn More...

    Regular Price: $370.00

    Special Price $315.00

  • WORX Yamaha Superjet Pump Shoe

    Worx Racing cast aluminium pump shoe is a direct replacement for the stock plastic pump shoe that easily distorts and breaks under high speeds in race applications or under huge load from freestyle engines. Pre drilled and tapped for easy installation this is a must have upgrade for your modified stand up to allow use of larged winged aftermarket intake grates that provide maximum efficiency to your jet pump without sacrificing reliability. Suits...
    Learn More...
    $159.00

  • WR04041 Yamaha Superjet Exhaust sleeve

    WORX Yamaha superjet exhaust sleeve fits directly into the OEM exhaust muffler and reduces the stinger size of the pipe to create more back pressure in the pipe for increased top speed. Used by all Pro National and World Lites class Champions
    Learn More...
    $69.99

  • RIVA Yamaha EX Top-Loader Intake Grate

    Our Yamaha EX Top-Loader intake grate improves hook up and handling in rough conditions. Center wing feeds your jet pump with an increased volume of water eliminating prop spin and cavitation. Powder coated to prevent corrosion. Key Features Include: Dramatic increase in jet pump hook-up. Improved top speed in rough conditions. No loss of top speed on smooth water. Significantly reduced cavitation. Race bred design improves handling. ...
    Learn More...
    $219.99

  • WR0703 Yamaha 2012+ FX, FX SHO, 2014+ FX SVHO Pump Seal Kit

    Yamaha Pump Plug Kit WR0703, Improves pump intake dynamics by changing the shape and flow of the standard pump intake system. This kit goes perfectly with the Worx Scoop Grate WR237 (also for the Yamaha 2012,2013,2014 FX, FX SHO.) The Kit is easy to fit and provides immediate improvement on stock.
    Learn More...
    $98.00

  • WORX Maxiloader Superjet & Waveblaster 1 & 2 Intake grate

    This is one of the first intake grates ever produced by Worx. It is used by many of the top racers and recreational riders world wide and is the most popular Superjet/Blaster Intake grate on the market. These boats cavitate easily and lose drive because of the relatively flat intake area, the WR201 will solve these issues and will take the handling capability of your boat to new levels. It is a great rough water and surf riding intake grate beca...
    Learn More...
    $225.00

  • WORX Intake Grate Yamaha Superjet / Blaster

    This is a similar grate to the WR201 however it is less aggressive and gives 1-2 MPH higher top speed but does not have the same braking effect as the WR201. If you want top speed and usually ride in calmer/smoother water this is the one for you. Perfectly matched to enable easy installation. Fits all years 1990-2017 Yamaha Superjet and WaveBlaster 1, 2.
    Learn More...
    $225.00

  • WR216 Yamaha XL 1200 LTD, 01 XLT Intake Grate

    This intake grate will increase pump efficiency in all water conditions and with the two parallel bars running the full length of the pump intake you also get better directional stability when you are towing water skiers or other water toys.
    Learn More...
    $197.00

  • WR04036 YAMAHA ENGINE COOLING ADAPTER/ANODE

    Billet anodised fitting to replace anode block which allows for extra cooling water to be added or removed from the rear of Yamaha 1.8 Engine block to suit your cooling needs.  A must for any modified recreational or race craft.
    Learn More...
    $44.00

Items 1 to 20 of 70 total

per page

Page:
  1. 1
  2. 2
  3. 3
  4. 4
LiveZilla Live Chat Software

Please wait...

You've added this item to your shopping cart:

{{var product.name}}

Part #: {{var product.sku}}





Item successful removed.
 Continue shopping

    Pay Securely Now