Free Shipping* on orders over $139 with code SHIPIT
Hydro-Turf ships in about 1-2 weeks.
WE BEAT ANY PRICE! Check us out on YouTube!

Kawasaki PWC Performance Parts

Let us know if you have any questions or concerns. We proudly price match advertised prices!

Items 1 to 20 of 33 total

per page

Page:
  1. 1
  2. 2
  • Kanaflex Tubing - Sold by the Foot

    Ordered by the foot. Select the quantity you need, and we will send that length.We offer the primary components individually from our Power Filter Kits for the "Do-It-Yourself" tuners. Velocity stack kits designed to fit stock supercharger inlets. Power Filter, Double Male Flange and Ducting designed to work together. Pre-Filter strongly recommended to prevent water ingestion. All components sold as is and do not include installation instruction...
    Learn More...
    $9.95

  • WORX Intake Grate - WR219 - Kawasaki STX / STX-R / 12F / 15F

    Benefits of this intake grate include: Reduced porpoising Minimal to zero top speed loss (up to 3mph gain in choppy conditions!) Greater control & turning capability
    Learn More...
    $215.00

  • Riva Free Flow Exhaust Kit Ultra 310

    Improves engine performance by reducing back pressure and harmful detonation. Replaces the restrictive secondary water box located between the primary water box and hull exit on your watercraft. High quality aluminum exhaust tube will survive meltdowns & backfires. The mandrel bent tubing is powder coated to prevent corrosion. Features billet exhaust outlet with laser etched graphics that is anodized to prevent corrosion. Includes high temp...
    Learn More...
    $311.70

  • RIVA Kawasaki Ultra 310/300 Performance Power Filter Kit

    Delivers greatly improved acceleration and increased top speed by replacing the restrictive stock intake system. The Power Filter feeds your supercharger with an increased volume of air via a large 4” diameter intake duct and oversized K&N filter element. Ducting is precision formed from a race proven composite that will not conduct heat to incoming air. Includes water-repellent pre-filter. IJSBA legal for all classes. Fits: ...
    Learn More...
    $279.95

  • WR203 KAWASAKI 750 SX/SXI

    This was the first of the larger stand-up Jet Ski produced by Kawasaki and dominated racing for a number of years. Although larger than the previous 300, 440 and 550 models a similar hull design was used with the same result: poor hook-up in most conditions without an after market intake grate. This intake grate was designed when all of the pro riders were riding this model Kawasaki, it will transform your boats performance in all water condition...
    Learn More...
    $197.00

  • WR202 KAWASAKI 650 SX/ X2 INTAKE GRATE

    These model skis have a very flat intake area that lose hook up in anything but perfect conditions. To get any sort of performance from these two boats an intake grate is absolutely essential. The major performance benefit of our WR202 is improved hook up in all water conditions. It will transform your boat in choppy and rough conditions by reducing cavitation and keeping the pump fully loaded.
    Learn More...
    $159.00

  • WORX KAWASAKI ULTRA 300/310 PUMP WEDGE

    2 DEG Billet anodised pump wedge Promotes bow lift to increase top speed from 1 to 2 mph Higher nose ride height allows for dryer ride Cost effective upgrade for better handling and top speed Fast and easy install
    Learn More...
    $95.00

  • WR236 KAWASAKI ULTRA 300, 310, 310R

    - Greater control and turning stability- Enhanced hook up/ reduces cavitation- Improved handling/drive in rough water conditions
    Learn More...
    $245.00

  • WORX Kawasaki ZXI, STX 1100, STX 750/900 Intake Grate

    This intake grate combats the boats tendency to porpoise when you are riding two up, holding the boat a lot flatter on the water and will improve handling and hook up. Combine with Worx Sponsons WR513 for ultimate handling and performance.
    Learn More...
    $208.00

  • Kawasaki Free Flow Exhaust Kit 2008-13 Ultra Models

    This exhaust kit enables you to bypass or remove secondary muffler (weight savings of +10lbs) improving engine performance by reducing back pressure and harmful detonation. Mandrel bent aluminum exhaust tube is lightweight and powder coated to resist corrosion. Included billet exhaust tip (also sold separately) with laser etched graphics is anodized to prevent corrosion. High temperature silicone couplers included with detailed installation instr...
    Learn More...
    $279.95

  • WR307 KAWASAKI SX/SXI RIDE PLATE

    This ride plate is a direct bolt on replacement The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate holds the boat flatter and stops porposing, the 'D' cut makes a big difference to the handling and allows the boat to stay flatter in rough water and promotes better hook up and drive
    Learn More...
    $299.00

  • Kawasaki Water Box Ultra Models

    Developed on our Dyno and tested extensively on the water, this water box features radiused exhaust tubes and end caps for optimum exhaust flow. Unique exhaust baffle will increase the low-end power and mid-range pull of your Kawasaki Watercraft. Delivers up to 15hp on modified engines along with significant torque gains. High-strength aluminum construction will survive backfires and meltdowns. Powder coated to prevent corrosion. A must for modif...
    Learn More...
    $419.95

  • WR303 KAWASAKI 750 SX/SXI RIDE PLATE

    This ride plate is a direct bolt on replacement The plate is considerably longer then the OEM plate with our trademark 'D' cut in it, the extra length of the plate holds the boat flatter and stops porposing, the 'D' cut makes a big difference to the handling and allows the boat to stay flatter in rough water and promotes better hook up and drive
    Learn More...
    $222.00

  • Worx Racing Sponsons Kawasaki 1200 STX-R

    This was the first all new standup model ski to be released by Kawasaki since 1992. It has a new 800cc engine and is extremely popular for racing and recreational riding. Worx has two different types of ride plate WR310, WR311 and intake grates WR222, WR225 for this boat and these sponsons work well with both combinations. Our sponsons fit under the gunnel beading on the bond line of the boat where the hull and deck are joined together and come i...
    Learn More...
    $340.00

  • WORX Kawasaki SX-R 800 Ride Plate Fielder

    This WR 310 is a totally new design for the SXR developed for WORX back in 2004 by team rider Jordan Fielder and his US tuner Ronnie Saner. This ride plate was used by Jordan to take out number 1 in Pro Mod class at World Finals that year.
    Learn More...
    $222.00

  • WR508 KAWASAKI ZXI 900/1100

    - Greater stability - Improved cornering - Superior handling
    Learn More...
    $260.00

  • RIVA Kawasaki SX-R 1500 Power Filter

    RIVA Racing's Power Filter feeds your SX-R 1500 engine with a steady diet of cool air delivering greatly improved acceleration and RPM. This system draws cool air from front of engine compartment near factory hull vents. Replaces restrictive stock air box with a high volume, precision-formed intake tube. Cool air enters the system via an oversized K&N filter element. Includes detailed installation instructions. Note: For heavy surf use we reco...
    Learn More...
    $339.95

  • WORX Kawasaki SX-R 800 Ride Plate

    This ride plate features a wider section at the back with two concaves as well as the famous Worx ‘D’ cut-out which allows you to push the boat hard into turns and provides greater stability and less tendency to slide out The wider tail section and the double concaves together with the 'D' cut make this plate far superior to anything we tested it against, the extra width is like an extension off boat length in the rough and lets you s...
    Learn More...
    $299.00

  • RIVA Pro Bar 0-Degree Bars

    RIVA PRO-BAR 0- Degree Standup Bars are constructed from a proprietary aluminum alloy that offers maximum strength with reduced vibration. High tech finish and premium features make this the ultimate watercraft bar! Key Features: Made from 7/8”, proprietary, T6 aluminum alloy for superior tensile strength & vibration dampening Cross bar clamps CNC machined from 6061 aluminum and mounted with stainless hardware & threadlock C...
    Learn More...
    $74.95

  • WORX Kawasaki STX 1100, STX 750/900 Sponsons

    Fully adjustable to suit your style of riding and ability!
    Learn More...
    $280.00

Items 1 to 20 of 33 total

per page

Page:
  1. 1
  2. 2
LiveZilla Live Chat Software

Please wait...

You've added this item to your shopping cart:

{{var product.name}}

Part #: {{var product.sku}}





Item successful removed.
 Continue shopping

    Pay Securely Now